What’s the difference between synthetic and conventional oil?

The Short Answer

Synthetic engine oil is chemically engineered for more uniform performance, while conventional oil is a less-refined crude byproduct. Synthetic flows through the engine faster in cold weather, holds up better under heat, and resists breakdown longer, which is why it lasts longer between changes. “I want our customers to have oil that’s going to protect the engine when it’s cold, when it’s hot, and anywhere in between. Synthetic oil gives you more confidence the engine is getting that protection,” says Terri Walker, Master Technician at Audi El Paso. Whichever you choose, use the viscosity and performance specs in your owner’s manual. Most newer engines, and nearly all turbocharged ones, call for synthetic. If your manual doesn’t require it, conventional oil changed on schedule still does the job, but synthetic gives you a wider margin.

There’s a third option, too. Synthetic blends mix synthetic and conventional base oils and split the difference on both protection and price. They’re a reasonable choice for an engine that doesn’t require full synthetic but sees moderately demanding use, though they won’t match full synthetic’s cold-start flow or high-heat resistance. The deciding factor is the oil specification your engine calls for, not the label. “I would never want a customer choosing an oil just because the bottle says synthetic, or because it’s the cheapest option. The right oil is about meeting the manufacturer’s requirements, not what’s written on the front of the bottle,” Walker says. If your vehicle requires full synthetic, use it.

Why do turbocharged and high-performance engines almost always require synthetic oil?

Turbocharged engines run hotter and spin components faster, which puts more heat and stress on the oil. Conventional oil breaks down and thins out sooner under that kind of load, leaving less protection precisely when the engine needs it most. Modern engines are also built to tighter tolerances than older designs. “Audi engines are designed with very tight tolerances: the turbocharger systems, the variable oil pressure systems. They’re all components that depend on very good oil pressure and lubrication,” Walker says. Synthetic oil’s structure resists breakdown under those conditions, which is why most automakers now specify it, not just recommend it, for turbocharged and high-output engines. Using conventional oil in these engines can shorten their life even if you change it on schedule.

Is it okay to switch from conventional to synthetic oil?

Yes. There’s a myth that switching oil types can damage older engines or cause leaks, but modern synthetic oils are compatible with the same seals and gaskets as conventional oil. “I don’t believe that switching to synthetic automatically causes problems,” Walker says. “If the engine is already a bit older and has a leak or some worn seals, the properties of synthetic oil can sometimes make that existing issue more noticeable. I wouldn’t blame the oil for the leak. I’d look at the condition of the engine.” In other words, synthetic can reveal a problem that was already there; it doesn’t create one. If you’re switching an older, high-mileage vehicle, consider a high-mileage synthetic blend, and keep an eye on the driveway for the first few weeks.

How much more does each type of oil actually cost?

Prices vary by shop, region, and engine size, but national data shows a consistent pattern: full synthetic costs the most per change, conventional costs the least, and synthetic blend sits in between, closer to conventional than to full synthetic.

ComparisonTypical price rangeTypical difference
Full synthetic vs. conventional$60 to $130 (avg. about $95) vs. $30 to $75 (avg. about $50)About $45 more, roughly 80 to 90% higher
Synthetic blend vs. full synthetic$40 to $90 (avg. about $65) vs. $60 to $130 (avg. about $95)About $30 less, roughly 30% lower
Synthetic blend vs. conventional$40 to $90 (avg. about $65) vs. $30 to $75 (avg. about $50)About $15 more, roughly 30% higher

Figures are national averages compiled from quick-lube and dealership pricing data. Expect to pay more at a dealership and less at a national chain or independent shop running a promotion.

Does the type of oil I use affect fuel economy?

It can, but probably not enough to notice at the gas pump. Synthetic oils generally have lower internal friction, which translates to a small efficiency gain: low single-digit percent, not anything dramatic. The bigger fuel-economy factor is viscosity grade, not synthetic versus conventional, so using the weight specified in your owner’s manual matters more than which category of oil you choose.

Schedule an oil change

Group 1 Automotive 29.77820259298989, -95.55981488530338.